RIO-8

The RIO-8 is a low-cost, input-protected I/O module with four optically-isolated digital inputs and four 2 Amp dry relay outputs. The digital input channels can accumulate pulse counts for AMR applications.

The RIO-8 is configured, read, and controlled using Modbus RTU commands through a wireless link. The device's Modbus address can be set with a software configuration tool or with an on-board, 8-position, DIP switch.

The enclosure supports wall panel or DIN rail mounting.

Ordering Information

The RIO-8 device is available in two configurations:

• 8 to 14 VDC p/n RIO-8
• 9 to 28 VDC p/n RIO-8-28